Q-SPRAY 160F - COAT

Polyurethane Coating Material - FIRE RESISTANT

Q-SPRAY 160 F is a FIRE RESISTANT, EUROPEAN NORM EN 13501-1: CLASS B - S1 certified 2-component polyurethane hard coating.

Q-SPRAY 160F is solvent-free and particularly suitable for the coating of Polystyrene Foam and Styrodur (EPS / XPS). Q-SPRAY 160F hardens in about 10 seconds and can be applied to horizontal and vertical surfaces without without running off. It forms a hard, impact resistant surface. Hardened Q-SPRAY 160F is highly shock-resistant and tough.

To process Q-SPRAY 160F, our High Pressure Coating machine is required.

Q-SPRAY 160F

Q_SPRAY 150C Polyurethane <a title=paintingGOOD TO KNOW To paint symbols made from Styrofoam or Styrodur we highly recommend top quality acrylic paints without solvents. These paints are available ready to use in almost any color. An additional mixing bench will enable you to create any desired color yourself. The acrylic dispersions are suitable for the one-sided, visible or complete painting of letters and logos: • One-sided: Will only color the front or top. All other surfaces will be left untreated. • Visible side: The color application will cover all visible surfaces of the object. Therefore, only the front and the sides will be fully covered with paint. In the back, the letter or logo will receive either no or only a light protective layer. Coloring the visible sides is ideal for wall letterings. • Complete paint job: Ideal for letters and logos that you would like to hang up, put up or glue to transparent displays. For fast and inexpensive painting, it is recommended to use a paint spray gun. Such spray guns work with compressed air, which is why a compressor or a pump is required to operate the spray gun. We also highly recommend a painting wall to extract the spray mist. Further information about the safe handling of spray guns can be found on the American OSHA (Occupational Safety and Health Administration) website. ">Coating System" width="450" />
  • PRICE AT

    558,00 € + Tax

  • PRICING

Application

  • Protection, Reinforcing, Moulding
  • Props, Film & TV
  • Packing, special packing
  • Mold, formwork construction
  • Horizontal and vertical surfaces
  • In mould spraying with release agent
  • Crafts and Industry

Specification

  • Fire resistance EN 13501-1: CLASS B - S1
  • Reinforcing and protecting
  • Waterproofing and high impact resistant
  • Fast setting: 60-70 sec
  • No VOC’s and no odors
  • Direct application on EPS and PU foam
  • Direct in mould application for reproduction of objects
  • Hard, impact-resistant surface

Technical Data

Q-SPRAY
Fire resistance EN 13501-1: CLASS B - S1
Mix Ratio 1 : 1
Covering 1 kg/sqm @ 1mm
Shore D 70-75
Color neutral
VOC free
Gel Time 10 sec
Tack free time 60 sec
Demoulding after 5-15 min
Paintable 5-15 min

Q-SPARY POLY ISO Sytem Price net.
Q-SPARY 160F 25 kg

28 kg

53 kg Inquiery
Q-SPARY 160F 50 kg

56 kg

106 kg Inquiery
Q-SPARY 160F 220 kg

250 kg

470 kg Inquiery


Content of delivery

  • 1 Drum/Can ISO, 1 Drum/can Poly
  • Material Safty Sheet
  • Material certificate EN 13501-1: CLASS B - S1

To spray the Material our high pressure and high temperature plural component equipment is needed and is not part of the delivery.

Delivery Q_SPRAY 150C Polyurethane <a title=paintingGOOD TO KNOW To paint symbols made from Styrofoam or Styrodur we highly recommend top quality acrylic paints without solvents. These paints are available ready to use in almost any color. An additional mixing bench will enable you to create any desired color yourself. The acrylic dispersions are suitable for the one-sided, visible or complete painting of letters and logos: • One-sided: Will only color the front or top. All other surfaces will be left untreated. • Visible side: The color application will cover all visible surfaces of the object. Therefore, only the front and the sides will be fully covered with paint. In the back, the letter or logo will receive either no or only a light protective layer. Coloring the visible sides is ideal for wall letterings. • Complete paint job: Ideal for letters and logos that you would like to hang up, put up or glue to transparent displays. For fast and inexpensive painting, it is recommended to use a paint spray gun. Such spray guns work with compressed air, which is why a compressor or a pump is required to operate the spray gun. We also highly recommend a painting wall to extract the spray mist. Further information about the safe handling of spray guns can be found on the American OSHA (Occupational Safety and Health Administration) website. ">Coating System" border="0" width="300" height="207"> Q-SPRAY

Optional Accessories

Delivery

  • About 2 weeks after receiving payment
  • Insured transportation via Schenker
  • Pickup available