Q-SPRAY 160 - COAT

Polyurethane Coating Material for EPS / XPS

Q-SPRAY 160 is a 2-component polyurethane hard coating, is solvent-free and particularly suitable for the coating of Polystyrene Foam and Styrodur (EPS / XPS).

Q-SPRAY 160 hardens in about 10 seconds and can be applied to horizontal and vertical surfaces without without running off. Q-SPRAY 160 forms a hard, impact resistant surface. It can be sprayed into rubber molds to make fast, impact resistant castings.

To process Q-SPRAY 160, our Cartridge Gun or the High Pressure Coating machine is required. Hardened Q-SPRAY 160 is highly shock-resistant and tough.

Q-SPRAY 160

Q_SPRAY 150C Polyurethane <a title=paintingGOOD TO KNOW To paint symbols made from Styrofoam or Styrodur we highly recommend top quality acrylic paints without solvents. These paints are available ready to use in almost any color. An additional mixing bench will enable you to create any desired color yourself. The acrylic dispersions are suitable for the one-sided, visible or complete painting of letters and logos: • One-sided: Will only color the front or top. All other surfaces will be left untreated. • Visible side: The color application will cover all visible surfaces of the object. Therefore, only the front and the sides will be fully covered with paint. In the back, the letter or logo will receive either no or only a light protective layer. Coloring the visible sides is ideal for wall letterings. • Complete paint job: Ideal for letters and logos that you would like to hang up, put up or glue to transparent displays. For fast and inexpensive painting, it is recommended to use a paint spray gun. Such spray guns work with compressed air, which is why a compressor or a pump is required to operate the spray gun. We also highly recommend a painting wall to extract the spray mist. Further information about the safe handling of spray guns can be found on the American OSHA (Occupational Safety and Health Administration) website. ">Coating System" width="450" height="350" />
  • PRICE AT

    1.100,00 € + Tax

  • PRICING

Application

  • Protection, Reinforcing, Moulding
  • Props, Film & TV
  • Packing, special packing
  • Mold, formwork construction
  • Horizontal and vertical surfaces
  • In mould spraying with release agent
  • Crafts and Industry

Specification

  • Reinforcing and protecting
  • Waterproofing and high impact resistant
  • Fast setting: 60-70 sec
  • No VOC’s and no odors
  • Direct application on EPS and PU foam
  • Direct in mould application for reproduction of objects
  • Hard, impact-resistant surface

Technical Data

Q-SPRAY
Fire resistance Class B2
Mix Ratio 1 : 1
Covering 1kg/sqm @ 1mm
Shore D 62
Color off White (cremewhite)
VOC free
Sandable very good
Gel Time 10 sec
Tack free time 21 sec
Demoulding after 5 min
Paintable 5 min

Q-SPARY POLY ISO Sytem Price net.
Q-SPARY 160 25 kg

25 kg

50 kg Anfrage
Q-SPARY 160 50 kg

50 kg

100 kg Anfrage
Q-SPARY 160 200 kg

200 kg

400 kg Anfrage


Content of delivery

  • 1 Drum/Can ISO, 1 Drum/can Poly
  • Material Safty Sheet

To spray the Material our high pressure and high temperature plural component equipment is needed and is not part of the delivery.

Delivery Q_SPRAY 150C Polyurethane <a title=paintingGOOD TO KNOW To paint symbols made from Styrofoam or Styrodur we highly recommend top quality acrylic paints without solvents. These paints are available ready to use in almost any color. An additional mixing bench will enable you to create any desired color yourself. The acrylic dispersions are suitable for the one-sided, visible or complete painting of letters and logos: • One-sided: Will only color the front or top. All other surfaces will be left untreated. • Visible side: The color application will cover all visible surfaces of the object. Therefore, only the front and the sides will be fully covered with paint. In the back, the letter or logo will receive either no or only a light protective layer. Coloring the visible sides is ideal for wall letterings. • Complete paint job: Ideal for letters and logos that you would like to hang up, put up or glue to transparent displays. For fast and inexpensive painting, it is recommended to use a paint spray gun. Such spray guns work with compressed air, which is why a compressor or a pump is required to operate the spray gun. We also highly recommend a painting wall to extract the spray mist. Further information about the safe handling of spray guns can be found on the American OSHA (Occupational Safety and Health Administration) website. ">Coating System" border="0" width="300" height="207"> Q-SPRAY

Optional Accessories

  • Q-SPRAY Coating Machine
  • Q-SPRAY Cartridge Sytem

Delivery

  • About 2 weeks after receiving payment
  • Insured transportation via Schenker
  • Pickup available